MARC Cluster Guide

Cybersecurity awareness at the U of C

Please note that there are typically about 950 phishing attempts targeting University of Calgary accounts each month. This is just a reminder to be careful about computer security issues, both at home and at the University. Please visit https://it.ucalgary.ca/it-security for more information, tips on secure computing, and how to report suspected security problems.

Need Help or have other ARC Related Questions?

For all general RCS related issues, questions, or comments, please contact us at support@hpc.ucalgary.ca.

This guide gives an overview of the MARC (Medical Advanced Research Computing) cluster at the University of Calgary.

It is intended to be read by new account holders getting started on MARC, covering such topics as the hardware and performance characteristics, available software, usage policies and how to log in.

If you are looking for how to login to MARC or how to get an account, please see MARC_accounts

Introduction

MARC is a cluster comprised of Linux-based computers purchased in 2019

The MARC cluster has been designed with controls appropriate for Level 3 and Level 4 classified data. The University of Calgary Information Security Classification Standard is published here: https://www.ucalgary.ca/policies/files/policies/im010-03-security-standard_0.pdf

Due to security requirements for Level 3/4 data, some necessary restrictions have been placed on MARC to prevent accidental (or otherwise) data exfiltration.

• Compute nodes and login nodes have no access to the internet
• All data must be ingested to MARC by first copying it to SCDS (Secure Compute Data Store) and then fetching it from SCDS to MARC.
• Resulting data (outputs of analyses) must be copyied to SCDS and then fetching it from SCDS to wherever it needs to go using established means.
• All file accesses are recorded for auditing purposes.
• ssh connections to MARC must be through the IT Citrix system (Admin VPN is not sufficient nor necessary)
• All accounts must be IT accounts
• A project ID is required to use MARC. This project ID is the same number that is used on SCDS

Hardware

MARC has compute nodes of two different varieties:

• 8 GPU (Graphics Processing Unit)-enabled nodes containing:
  • 40-cores: each node having 2 sockets. Each socket has an Intel Xeon Gold 6148 20-core processor, running at 2.4 GHz.
  • The 40 cores on the individual compute nodes share about 750 GB of RAM (memory) but, jobs should request no more than 753000 MB.
  • Two Tesla V100-PCIE-16GB GPUs.
• 1 Bigmem Node
  • 80-cores: node with 4 sockets. Each socket has an Intel Xeon Gold 6148 20-core processor, running at 2.4 GHz.
  • The 80 cores on the node share about 3 TB of RAM (memory), but, jobs should request no more than 3000000 MB.

cpu2019

Allows non-GPU jobs to use:

• Up to 38 cpus per node
• No gpus.
• Up to 500GB memory
• Are the same

gpu2019

Allows jobs requiring nVidia v100 gpu jobs to use:

• 1 or 2 gpus per node
• Up to 40 cpus per node.
• Up to 750GB memory

bigmem

For very large memory jobs:

• Up to 80 cpus
• Up to 3TB memory
• No gpus

Storage

About a petabyte of raw disk storage is available to the MARC cluster, but for error checking and performance reasons, the amount of usable storage for researchers' projects is considerably less than that. From a user's perspective, the total amount of storage is less important than the individual storage limits. As described below, there are two storage areas: home and project.

Home file system: /home

There is a per-user quota of 50 GB under /home. This limit is fixed and cannot be increased. Each user has a directory under /home, which is the default working directory when logging in to MARC. It is expected that most researchers will work from /project and only use home for software and such things. /home is expected to be used only for L1/L2 data and not for your patient identifiable files. The identifiable files go in the appropriate directory under /project.

Project file system for larger projects: /project

Directories will be created in /project named after your project ID. This name will be the same as your SCDS share name. The expectation is that all files to do with that project will be stored in /project/projectid. Quotas in /project are somewhat flexible. Please write to support@hpc.ucalgary.ca with an estimate of how much space you will require.

Further Reading

See Running_jobs for information on starting a job